New formaldehyde-free adhesives for wood manufacturing: In vitro evaluation of potential toxicity of fine dust collected during wood sawing using a new experimental model to simulate occupational inhalation exposure.

Formaldehyde mainly emitted from wood adhesives, finishing materials, paint for furniture represents, together with wood dust, a potential carcinogenic risk for wood workers. Aims of this multidisciplinary study are to investigate the possibility of replacing urea-formaldehyde (UF) adhesives in the wood industry with organic and/or inorganic-based glues to obtain a final less toxic product and to evaluate the potential toxicity of wood glued with such new adhesives. For this purpose we selected poplar wood to test an organic new adhesive HBP (Hemp Based Protein), a mixture of hemp flour and cross-linker PAE (polyaminoamide epichlorohydrin), and spruce wood to test an inorganic adhesive geopolymer K-PSS (potassium-polysiloxosialate) plus polyvinyl acetate. For the poplar wood, we also used a commercial panel glued with UF for comparison. We reproduced occupational inhalation exposure during sawing activities of mentioned woods, collected and characterized the wood dusts emitted during sawing and evaluated in vitro their potential cyto-genotoxic and inflammatory effects. We used human lung cells (A549) exposed for 24 h to 20 and 100 µg/mL of collected PM2.5 wood dust. We found that both the new adhesives wood dusts induced a slightly higher apoptotic effect than untreated natural wood dusts particularly in spruce wood. Only geopolymer K-PSS wood dust induced membrane damage at the highest concentration and direct and oxidative DNA damage that could be explained by the different chemical composition and the lower particle sizes in respect to organic HBP adhesive wood dust. We found slight induction of IL-6 release, not influenced by K-PSS treatment, at the highest concentration in spruce wood. For poplar wood, IL-6 and IL-8 induction was found particularly for untreated and UF-treated wood at the highest concentration, where hemp adhesive treatment induced lower inflammation while at lower concentration similar slight cytokine induction was found for all tested wood dusts. This preliminary study shows that natural adhesives used to replace UF adhesives represent an interesting alternative, particularly the organic hemp-based adhesive showing very low toxicity.

Association of subjective health symptoms with indoor air quality in European office buildings: The OFFICAIR project.

The aim of this study was to explore the association between the building-related occupants' reported health symptoms and the indoor pollutant concentrations in a sample of 148 office rooms, within the framework of the European OFFICAIR research project. A large field campaign was performed in 37 office buildings among eight countries, which included (a) 5-day air sampling of volatile organic compounds (VOCs), aldehydes, ozone, and NO2 (b) collection of information from 1299 participants regarding their personal characteristics and health perception at workplace using online questionnaires. Stepwise and multilevel logistic regressions were applied to investigate associations between health symptoms and pollutant concentrations considering personal characteristics as confounders. Occupants of offices with higher pollutant concentrations were more likely to report health symptoms. Among the studied VOCs, xylenes were associated with general (such as headache and tiredness) and skin symptoms, ethylbenzene with eye irritation and respiratory symptoms, a-pinene with respiratory and heart symptoms, d-limonene with general symptoms, and styrene with skin symptoms. Among aldehydes, formaldehyde was associated with respiratory and general symptoms, acrolein with respiratory symptoms, propionaldehyde with respiratory, general, and heart symptoms, and hexanal with general SBS. Ozone was associated with almost all symptom groups.

Indoor gaseous air pollutants determinants in office buildings-The OFFICAIR project.

The aim of this study was to identify determinants of aldehyde and volatile organic compound (VOC) indoor air concentrations in a sample of more than 140 office rooms, in the framework of the European OFFICAIR research project. A large field campaign was performed, which included (a) the air sampling of aldehydes and VOCs in 37 newly built or recently retrofitted office buildings across 8 European countries in summer and winter and (b) the collection of information on building and offices' characteristics using checklists. Linear mixed models for repeated measurements were applied to identify the main factors affecting the measured concentrations of selected indoor air pollutants (IAPs). Several associations between aldehydes and VOCs concentrations and buildings' structural characteristic or occupants' activity patterns were identified. The aldehyde and VOC determinants in office buildings include building and furnishing materials, indoor climate characteristics (room temperature and relative humidity), the use of consumer products (eg, cleaning and personal care products, office equipment), as well as the presence of outdoor sources in the proximity of the buildings (ie, vehicular traffic). Results also showed that determinants of indoor air concentrations varied considerably among different type of pollutants.

Assessment of indoor air quality in office buildings across Europe - The OFFICAIR study.

The European project OFFICAIR aimed to broaden the existing knowledge regarding indoor air quality (IAQ) in modern office buildings, i.e., recently built or refurbished buildings. Thirty-seven office buildings participated in the summer campaign (2012), and thirty-five participated in the winter campaign (2012-2013). Four rooms were investigated per building. The target pollutants were twelve volatile organic compounds, seven aldehydes, ozone, nitrogen dioxide and particulate matter with aerodynamic diameter <2.5µm (PM2.5). Compared to other studies in office buildings, the benzene, toluene, ethylbenzene, and xylene concentrations were lower in OFFICAIR buildings, while the α-pinene and d-limonene concentrations were higher, and the aldehyde, nitrogen dioxide and PM2.5 concentrations were of the same order of magnitude. When comparing summer and winter, significantly higher concentrations were measured in summer for formaldehyde and ozone, and in winter for benzene, α-pinene, d-limonene, and nitrogen dioxide. The terpene and 2-ethylhexanol concentrations showed heterogeneity within buildings regardless of the season. Considering the average of the summer and winter concentrations, the acetaldehyde and hexanal concentrations tended to increase by 4-5% on average with every floor level increase, and the nitrogen dioxide concentration tended to decrease by 3% on average with every floor level increase. A preliminary evaluation of IAQ in terms of potential irritative and respiratory health effects was performed. The 5-day median and maximum indoor air concentrations of formaldehyde and ozone did not exceed their respective WHO air quality guidelines, and those of acrolein, α-pinene, and d-limonene were lower than their estimated thresholds for irritative and respiratory effects. PM2.5 indoor concentrations were higher than the 24-h and annual WHO ambient air quality guidelines.

A preliminary study on ambient levels of carbonyls, benzene, toluene and xylene in the south-west of the Iberian Peninsula (Huelva coast), Spain.

We report the first observations of volatile organic compound (VOC) concentrations, including aldehydes, in the coastal, industrial area of Huelva near the Doñana National Park (south-west of the Iberian Peninsula). The periods studied were July-September 2008 and February-November 2009. Formaldehyde, acetaldehyde, acetone, propanal, benzene, toluene and m/p-xylenes were identified and quantified. Acetone and formaldehyde were the most abundant carbonyls, followed by acetaldehyde and propanal. Maximum and minimum values for all these compounds in the period of measurement, and their relationship with meteorological parameters or influence of anthropogenic or biogenic emissions, are analysed. Finally, different concentration ratios and correlations were calculated to assess the effect of the anthropogenic or biogenic processes on the observed VOC levels.

Preliminary characterization of polycyclic aromatic hydrocarbons, nitrated polycyclic aromatic hydrocarbons and polychlorinated dibenzo-p-dioxins and furans in atmospheric PM10 of an urban and a remote area of Chile.

The composition of particulate organic fraction was determined in atmospheric aerosols emitted in two sites of central and southern Chile. In particular, polycyclic aromatic hydrocarbons (PAHs), nitrated-PAHs (N-PAHs) and polychlorinated dibenzo-p-dioxins (PCDDs) and furans (PCDFs) were investigated in both the urban site of Concepcion and the remote site of Coyhaique. The sampling was carried out with an active device during March and April 2007, and organic compounds adsorbed in air particles, having an aerodynamic diameter lower than 10 microm (PM10), were characterized using gas chromatography coupled with mass spectrometric detection (GC-MS). Aerosol contents varied from 0.004 to 3.4 ng m(-3) for PAH, from 0.007 to 3.5 pg m(-3) for N-PAH, from 0.002 to 355.7 fg Nm(-3) for PCDDs and from 0.04 to 15 fg Nm(-3) for PCDFs. As expected, the lowest values were found in the remote area. In Concepcion city, despite the low number of samples, PAH levels and diagnostic ratios of some marker compounds suggested the diesel emissions, probably coming from trucks, as the major source of particulate organic pollutants associated with direct emission. Another important source of atmospheric pollution in the urban site was likely represented by the steel industry existing in this area, outlined both by the analysis of PAH and PCDD/F levels. In the samples collected in the remote air of Coyhaique (located in the southern part of Chile), the concentration of pollutants characterized by a long lifetime, as PCDD/Fs, could be related to long-range transport phenomena, instead of local sources.

Polycyclic aromatic hydrocarbon emission profiles and removal efficiency by electrostatic precipitator and wetfine scrubber in an iron ore sintering plant.

A monitoring campaign of polychlorinated dibenzo-p-dioxins and dibenzofurans, polyaromatic hydrocarbons (PAHs), and polychlorinated biphenyl was carried out in an Italian iron ore sintering plant by sampling the combustion gases at the electrostatic precipitator (ESP) outlet, at the Wetfine scrubber (WS) outlet, and by collecting the ESP dust. Few data are available on these micropollutants produced in iron ore sintering plants, particularly from Italian plants. This study investigates the PAH emission profiles and the removal efficiency of ESPs and WS. PAHs were determined at the stack, ESP outlet flue gases, and in ESP dust to characterize the emission profiles and the performance of the ESP and the WS for reducing PAH emission. The 11 PAHs monitored are listed in the Italian legislative decree 152/2006. The mean total PAH sum concentration in the stack flue gases is 3.96 microg/N x m3, in ESP outlet flue gases is 9.73 microg/N x m3, and in ESP dust is 0.53 microg/g. Regarding the emission profiles, the most abundant compound is benzo(b)fluoranthene, which has a relative low BaP toxic equivalency factors (TEF) value, followed by dibenzo(a,l)pyrene, which has a very high BaP(TEF) value. The emission profiles in ESP dust and in the flue gases after the ESP show some changes, whereas the fingerprint in ESP and stack flue gases is very similar. The removal efficiency of the ESP and of WS on the total PAH concentration is 5.2 and 59.5%, respectively.

Measurements of lower carbonyls and hydrocarbons at Ny-Alesund, Svalbard.

Measurements of gaseous organic compounds were carried out near Ny-Alesund, in the Norwegian Arctic, during September 2004. Twenty alkanes, alkenes and aromatic hydrocarbons from ethane to toluene and six aldehydes and ketones from formaldehyde to butanal, were identified and quantified in air samples. Hydrocarbons showed a quite uniform distribution, with ethane being by far the most abundant component (> 1 ppb), followed by propane (> 0.4 ppb) and butanes (> 0.3 ppb), while for unsaturated homologues, except ethene, concentrations never exceeding 0.05 ppb were observed. This distribution confirmed that hydrocarbon depletion during the transport time from Europe into the Arctic was depending upon their atmospheric lifetimes, calculated relatively to the OH reactivity scale. The presence of short lived hydrocarbons could be associated to local sources of anthropogenic and/or biogenic origin. Although the local air photochemistry played a primary role in the production of lower aldehydes in late summer, the observed mixing ratios of formaldehyde (in the 0.25 - 0.50 ppb range) could not be fully explained by known gas-phase chemistry. In this case additional sources, such as fluxes of formaldehyde from snow pack to the atmosphere and/or local anthropogenic activities, were to be taken into consideration. The possible influences of these sources on HCHO mixing ratios were analysed by means of a backward-trajectory circulation model.

Uncertainties of polynuclear aromatic hydrocarbon and carbonyl measurements in heavy-duty diesel emission.

In this note we describe the speciated particle-phase PM2.5 polynuclear aromatic hydrocarbon (PAH) and gas-phase carbonyl emissions as collected from a heavy-duty diesel bus outfitted with an oxidation catalyst for exhaust after-treatment. The vehicle was run on a chassis dynamometer during a transient cycle test reproducing a typical city bus route (Azienda Tramviaria Municipalizzata cycle). The diluted tailpipe emissions were sampled for PAH using a 2.5 microm cut size cyclone glass fiber filter assembly, while carbonyls were absorbed onto dinitrophenyl hydrazine-coated silica cartridges. The former compounds were analysed by CGC-MS, the latter by HPLC-UV. Combining the two sets of speciation data resulting from 15 identical dynamometer tests provided a profile of both unregulated organic emissions. PAH emission rates decreased with the number of benzene fused rings. Fluoranthene and pyrene amounted to 90% of total PAHs quantified; six-ring PAHs accounted only for 0.5%. Similarly, formaldehyde and acetaldehyde accounted for approximately 80% of the total carbonyl emissions. Uncertainties of the method in the determination of individual emission factors were calculated. Statistical data processing revealed that all the measurements were quite unaffected by systematic errors and repeatability percentages did not exceed 50% for the majority of components of both groups.

Characterization of polycyclic aromatic hydrocarbons and carbonyl compounds in diesel exhaust emissions.

Exhaust emissions from a recent model heavy-duty diesel vehicle (city bus) in a chassis dynamometer were measured during a transient driving cycle. Particle-bound polycyclic aromatic hydrocarbons (PAHs) and gaseous carbonyls, substances that create health hazards and are, as yet, unregulated were collected, the former on filters and the latter on dinitrophenylhydrazine (DNPH)-coated silica cartridges and analysed by GC-MS and HPLC, respectively. PAH emission rates decreased with the number of benzene fused rings. They averaged 0.2 mg km(-1) for a total of 11 PAHs ranging from fluoranthene to benzo(ghi)perylene. Fluoranthene and pyrene accounted for 90% of total PAHs. The sum of emission rates of C1 approximately C6 carbonyls averaged 174 mg km(-1), even if formaldehyde alone represented approximately 70% of the total carbonyl mass, followed by acetaldehyde (13%). Results obtained were compared with emission data reported in previous studies.

A new device for reducing diesel engine emissions: a preliminary investigation.

A new catalytic converter is compose by a alloy noble metal supported on inert wool and located downstream to combustion chamber appears able to markedly reduce the content of toxic organics, fine particulates and CO emitted by a diesel engine equipped truck. By contrast, emissions of NOx and particulate n-alkanes remain unaltered or increase, according to the driving and operating conditions of the vehicle. Although this tesrs are preliminary the results obtained, however, suggest that the adoption of this device significantly reduce the health risk associated to fine aerosols and carcinogenic PAH. Exhaust concentrations of some unregulated species, e.g. volatile aldehydes, were lowered by the oxidising catalyzer.